SD POLYCA™ Grades


350 Series
Steam resistant grades

SD POLYCA™ 350 series are steam resistant grades suitable for applications used in high humid / high temperature environments such as bathroom light covers.

Property Test method Test condition Unit 351-6 351-10 351-15 351-22
Tensile strength ISO 527-2 - MPa 60 60 60 60
Tensile modulus ISO 527-2 - MPa 2300 2300 2300 2300
Elongation ISO 527-2 - % 110 110 110 110
Flexural strength ISO 178 - MPa 85 85 85 85
Flexural modulus ISO 178 - MPa 2300 2300 2300 2300
Charpy notched impact strength ISO 179-1 23°C KJ/ 78 75 70 60

Temperature of deflection under load

ISO 75-2 Unannealed °C 128 126 126 126
MVR (Melt volume-flow rate) ISO 1133 300°C/1.2kg cm3/10min 6 10 15 22
Density ISO 1183 - Kg/m3 1200 1200 1200 1200
Water Absorption ISO 62 Water at 23°C, 24Hr % 0.20 0.20 0.20 0.20
Optical properties
Transmittance ASTM D-1003 - % 89 89 89 89
Reflective index ASTM D-542 - - 1.585 1.585 1.585 1.585
Mechanical properties
Tensile strength ASTM D-638 - MPa
kg/c
62
630
62
630
62
630
62
630
Elongation ASTM D-638 - % 130 130 130 130
Flexural strength ASTM D-790 - MPa
kg/c
89
910
89
910
89
910
89
910
Flexural modulus ASTM D-790 - MPa
kg/c
2200
22500
2200
22500
2200
22500
2200
22500
Rockwell hardness ASTM D-785 - R-Scale 118 118 118 118
Notched Izod impact strength ASTM D-256 23°C J/M
kgcm/cm
892
91
890
91
843
86
735
75
Thermal properties
Deflection temperature under load (Unannealed) ASTM D-648 1.82MPa °C 135 135 134 134
0.45MPa 141 140 140 139
Molding shrinkage ASTM D-995 Parallel
Transverse
% 0.5-0.7
0.5-0.7
0.5-0.7
0.5-0.7
0.5-0.7
0.5-0.7
0.5-0.7
0.5-0.7
Linear thermal expansion ASTM D-696 Parallel
Transverse
×10-5
cm/cm/°C
7
7
7
7
7
7
7
7
Electrical properties
Dielectric breakdown strength ASTM D-149 - KV/mm 20 20 20 20
Surface resistivity IEC 60093 - Ω 1015? 1015? 1015? 1015?
Volume resistivity IEC 60093 - ×1014
Ωm
3 3 3 3
Comparative tracking index IEC 60112 - V 300 300 300 300
Arc resistance ASTM D-495 - SEC 110 110 110 110
 
ISO notation >PC<

Download:

Product Stewardship

Sumika Polycarbonate Limited (“SCPC”) has a fundamental concern for all who make, distribute, and use its products“Products”, and for the environment in which we live. This concern is the basis for our Product Stewardship philosophy by which we assess the safety, health, and environmental information on our products and then take appropriate steps to protect employee and public health and our environment. The success of our Product Stewardship program rests with each and every individual involved with Products from the initial concept and research, to manufacture, use, safe, disposal, and recycle of each product.

Customer Notice

SCPC strongly encourages its customer to review both their manufacturing processes and their applications of Products from the standpoint of human health and environmental quality to ensure that Products are not used in ways for which they are not intended or tested. SCPC personnel are available to answer your questions and to provide reasonable technical support. Products literature, including safety data sheets, should be consulted prior to use of Products. Current safety data sheets are available from SCPC.

Medical Application Policy

NOTICE REGARDING MEDICAL APPLICATION RESTRICTIONS: SCPC will not knowingly sell or sample any product or service (“Product”) into any commercial or developmental application that is intended for:
  • long-term or permanent contact with internal body and fluids or tissues. “Long-term” is contact which exceeds 72 continuous hours;
  • use in cardiac prosthetic devices regardless of the length of time involved (“cardiac prosthetic devices” include, but are not limited to, pacemaker leads and devices, artificial hearts, heart valves, intra-aortic balloons and control systems, and ventricular bypass-assisted devices);
  • use as critical component in medical devices that support or sustain human life; or
  • use specifically by pregnant women or in applications designed specifically to promote or interfere with human reproduction.

SCPC requests that customers considering use of Products in medical applications notify SCPC so that appropriate assessments may be conducted. SCPC does not endorse or claim sustainability of its products for specific medical applications. It is the responsibility of the medical device or pharmaceutical manufacturer to determine that the Products are safe, lawful, and technically sustainable for the intended use.SCPC MAKES NO WARRANTIES, EXPRESS OR IMPLIED, CONCERNING THE SUSTAINABILITY OF ANY SCPC PRODUCT FOR USE IN MEDICAL APPLICATIONS.

Disclaimer

NOTICE:The information and data contained herein are given in good faith but do not constitute sales specifications.
NOTICE:The product properties may be changed without notice.
NOTICE: No freedom from infringement of any patent owned by SCPC or others is to be inferred. Because use conditions and applicable laws may differ from one location to another and may change with time, the Customer is responsible for determining whether products and the information in this document are appropriate for the Customer’s use and for ensuring that the Customer’s workplace and disposal practices are in compliance with applicable laws and other governmental enactments. SCPC assumes no obligation or liability for the information in this document. NO WARRANTIES ARE GIVEN; ALL IMPLIED WARRANTIES OF MARCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY EXCLUDED.
NOTICE: If products are described as “experimental” or “developmental”: (1) product specifications may not be fully determined; (2) analysis of hazardous caution in handling and use are required; (3) although SCPC may from time to time provide samples of such products, SCPC is not obligated to supply or otherwise commercialize such products for any use or application whatsoever.